eGo One Kit

The new product from Joyetech - eGo ONE. The one device for EVERYONE. A petite yet powerful e-cig. It comes with 1.8 mL or 2.5mL eGo ONE tank and 1100mAh or 2200mAh eGo ONE battery.

It uses two types of changeable atomizer heads. One atomizer at 1.0ohm is intended for mouth inhalers who seek the sensation of taking a puff of an analog cigarette, and the other at 0.5 sub-ohm for those seeking an effortless loose draw for creating huge cloud production.

Operation Guide

Power on and off: Press the button for 5 times in quick succession, the button light will flash 5 times to indicate eGo ONE is ready for use. In the same way, eGo ONE will be powered off after 5 presses. 

Vaping: press the button and inhale. When the button is held down, the button light will be on.

Charging: simply charge eGO ONE by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.

E-juice Filling: separate the atomizer from the battery and inject the liquid directly into the cambered slot.

Joyetech eGo ONE Starter Kit with 1.8ml eGo ONE Atomizer - 1100mAh

Atomizer Replacement: unscrew the atomizer cone, the atomizer head is located on the base. Just unscrew it and replace.

Note: please do not wash the atomizer with water.

Adjustment of Air Flow: rotating the ring on the tank's base clockwise to decrease the air inflow, and counterclockwise to enlarge the air inflow.

Battery display function: the light will flash slowly or stay lit when battery level is high, on the contrary, the light flashes in frequency. 

  • 60% - 100%          Stays lit
  • 30% - 59%            Slowly flashes
  • 10% - 29%            Moderately flashes
  • 0 - 9%                  Flashes in frequency

The battery light flashes red when charging or connecting with USB, and goes out in 5 seconds when it is fully charged.

Have more questions? Submit a request


Article is closed for comments.